LIGNOSTOP SH V 1045

permanent concentrated preparation for protection of wood with insecticidal effect for affected wood

Use:
• is a highly efficient concentrated spirit preparation for protection of wood affected by wood-destroying insects - insecticidal effect and long term prevention (more than 25 years) against wood-damaging fungi, including including dry rot fungus, wood-colouring fungi, moulds and wood-damaging insects;
• double effect - elimination and prevention;
• new elimination efficiency, coating is sufficient, no injection necessary;
• the preparation can be thinned also with industrial spirit (suitable when using under coatings);
• highly efficient chemical compounds get fixed in the wood to 100% already after partial drying (about 2 hours) and become completely non-extractable with water.
It means that the treated wood may be exposed to rain during storage or assembly and the efficiency of protective substances does not change;
• it may be used alone or it may be used under water-soluble or solvent-borne coating systems (varnishes, glazing paints, primers, single-layer paints);
• LIGNOSTOP can also be used for remediation coating of walling, plasters, etc. affected with moulds and for their protection against any new attack;
• and for temporary protection of unhewn timber against blue-staining and moulds;
• use preservatives for wood in a safe way;
• surfaces treated LIGNOSTOP SH must not come in contact with consumables, feeding stuffs and drinking water;
 
Advantages of the product:
• „2 v 1“ - elimination + long-term preventive protection;
• insecticidal effect - eliminates insects in all development stages;
• new elimination efficiency - coating is sufficient, no injection necessary;
• high efficiency - against wood-damaging fungi, insects, colouring and moulds;
• water-soluble concentrate - 1 litre for treatment of up to 25 m²;
• non-extractable with water - 100% fixation in the wood, wood may get wet;
• also for protection of walling and plasters;
• the same dosing for interior and for exterior;
• coating, spraying, dipping, injection, pressure treatment.
 
Application:
With a brush, roller, by dipping, injection or pressure treatment. To be thinned with water or spirit before use. One litre of the product protects surface of up to 25 m2. Before application, wood must be cleaned from impurities, rests of bark or old paint coats. It is necessary to take into consideration limited absorption of the preparation solution into wet wood.
 
Thinner: clean water, spirit, technical spirit
 
"Use biocides in a safe way. Before using, always read information stated on packaging and included information about the preparation."